standard, custom and modular power supplies
Medical Internal Power Supplies
Products > AC-DC Power Supplies > Internal Power Supplies > Medical > Medical Internal Power Supplies
MAC10 10W Pcb mount encapsulated
10W Pcb mountable
Universal input 85 – 264Vac
Single and Dual outputs available
No load power <0.5W
IEC60601-1/EN60601-1 approved for medical applications
FR55-410
55W AC-DC hospital paging system
Replaced an obsolete Farnell / Advance product
Multi-output product on a baseplate with custom loom configured to specification
Features safety cover
Quad output configuration with output voltages as low as 1.5Vdc
Optional open collector powerfail, DC ok signals, universal input and up to 3 fully isolated outputs
Dimensions of psu: 5″ x 3″ x 1U: see FR55 series for more details
FP110-410
110W battery backed baby ventilator to IEC/UL60601-1
Triple output product
Battery backup via external battery
Three outputs of 5.1V, 12V and 24V backed up from a 12V battery source (additional 13.8Vdc charge output provided)
Universal mains input 90 – 264Vac
Various battery charge monitoring signals supplied (open – collector)
Connection via Molex 0.156″ and 20W mini-fit junior (ATX type)
Dimensions 202×152×47mm
FS150-418
150W AC-DC blood analyser to UL 60601-1 (customer certified)
Quad output
Universal mains input of 90-264Vac
High peak power requirement to drive high current lamp via 24V output
4 outputs of 5V at 5A, +12V at 7A,-12V at 1A and 24V at 4A
Connection via Molex 0.156″ and minifit junior
Dimensions 230 x 115 x 62mm
FP150-710
150W AC-DC for nerve stimulation to UL60601-1
Open frame convection cooled to fit within wedge shaped enclosure in a surgical application
Universal mains input at 90 – 264Vac
Active Power factor correction to EN61000-3-2 class D
7 fully regulated output voltage rails: +12/+12/-12/+5/+3V3/+24/-24V
All outputs protected for current overload and over voltage
Connections via Molex mini fit / Molex 0.156″
Dimensions 163 x 169 x 50mm
FS250-610
250W AC-DC blood analyser to IEC60601-1
Multi output supply with up to 6 outputs
Mains input auto-select detection
Fan cooling
Connections via 0.156″ Molex and 9mm screw terminals
Dimensions 229 x 61 x 122m
FP300-13
300W lamp testing power supply (endoscopy / dental) to UL60601-1
300W fully programmable short arc xenon light source
Supplied to a US manufacturer of short-arc xenon lamps, this product offers a fully programmable light source for use within surgical applications.
Lamp ignition provided via >30kV trigger module provided internally or remote to the system
Programming and control achieved via membrane keypad or RS232 protocol Controlled variables: lamp current, lamp voltage, output power Modes of operation: continuous current supply, variable time, internal modulation, [read more]
FP400-610
400W AC-DC laser diode to IEC/EN60601-1
Supplied to a major European OEM of medical surgical equipment
400W laser current source for driving up to 35W CW laser diodes
Universal mains input 85-264Vac
Active PFC to EN61000-3-2 class D
Laser diode drive via constant current 60A (2V-5V) source
TEC output of 250W with reversible polarity
Additional auxiliary outputs of 5V, +/-15 and 29V provided
Diode output programmed via 0-10Vdc input with 0-10 dc current monitor signal provided for closed loop applications
Control [read more]
FP450-413
450W AC-DC laser diode to UL2601 and CSA
Up to 4 outputs including one programmable constant current output
Universal mains input
Active power factor correction
Output inhibit signal
Output connections via M6 Studs and Molex terminals
Mains input is via screw terminal
Dimensions 330 x 62 x 127mm
